| . |
|
|
|
|
|
|
| . |
|
|
|
«
Back |
|
| . |
|
|
|
»
Curing Compounds |
|
|
|
|
| . |
|
|
|
Steel Services & Supplies: Ameri Resin Cure |
|
| . |
|
|
|
The Steel Services & Supplies Ameri Resin Cure is a water emulsified,
resin based liquid membrane forming curing compound for freshly poured concrete. The Steel
Services & Supplies Ameri Resin Cure forms a continuous membrane that controls curing
for strong and durable concrete. The Ameri Resin Cure is formulated to comply with V.O.C.
content limits, as required by Air Pollution Control Regulations on Architectural
Coatings. Applied to fresh concrete, the
Steel Services & Supplies Ameri Resin Cure forms a vapor sealing membrane which
retains more than 95% of the reactive moisture for three or more days. The Ameri Resin
Cure may be applied on interior, exterior, horizontal, vertical, fresh or aged surfaces.
Specially designed for use on exterior commercial projects,
such as highways, residential paving, airport runways, concrete lined canals, dams,
parking lots, engineering projects and as specified.
|
|
| . |
|
|
|
» Container
Sizes |
|
|
|
|
| . |
|
|
|
•
55 gallon drums (208.2 L)
• 5 gallon pails (18.9 L) |
|
| . |
|
|
|
» Specifications |
|
|
|
|
| . |
|
|
|
ASTM C-309, Type I, Class A and B AASHTO M-148, Type I Also available in Type ID (Red Dye) and Type II (white pigmented).
Approved by many State D.O.T.'s.
|
|
| . |
|
|
|
» Architectural
Specifications |
|
|
|
|
| . |
|
|
|
Resin Curing Compound: Immediately after final trowel or finish, apply an
approved curing compound. Material must comply with ASTM C-309-91 Type I (ID), Class A
& B. Approved product: Steel Services & Supplies
Ameri Resin Cure or approved equal. |
|
| . |
|
|
|
» First Aid |
|
|
|
|
| . |
|
|
|
Internal: If swallowed, immediately call physician, hospital emergency room
or Poison Control Center. Do not induce vomit. External: Wash with soap and water.
|
|
| . |
|
|
|
» Test Data |
|
|
|
|
| . |
|
|
|
| . |
|
|
|
|
Specification Compliance: |
|
|
|
|
|
Complies with all specification
requirements of ASTM C-309 Type I (ID), Class A & B and AASHTO M-148, Type i, Class A
& B |
|
|
|
|
| . |
|
|
|
Moisture Loss: |
Test Results |
|
|
|
|
|
|
Applied at 200 ft²/gal. (4.9 m²/L) |
.38 kg/m²* |
|
|
|
|
|
|
Test Requirement |
.55 kg/m² |
|
|
|
|
|
| . |
|
|
|
|
Independently Tested |
|
|
|
|
|
| . |
|
|
|
|
|
|
| . |
|
|
|
» Important
Information |
|
|
|
|
| . |
|
|
|
The
Steel Services & Supplies Ameri Resin Cure should be stored in tightly sealed original
factory containers. Store in a horizontal position to prevent moisture accumulation on the
drum head. Do not allow to freeze. Tools and
equipment should be flushed and cleaned with water immediately after use. Use Steel
Services & Supplies cleaning solvent for sprayers to remove cured or residual material
then thoroughly flush with water to remove all solvent residue. Protect plastic or rubber
parts from solvent.
Complete technical and specification services are available
from our authorized service representatives.
|
|
| . |
|
|
|
» Air pollution
Control Laws |
|
|
|
|
| . |
|
|
|
Less than 3.50 g/l. Complies with Federal V.O.C. standards for Curing
Compounds. Do not thin or dilute. |
|
| . |
|
|
| . |
|
|
|
« Back |
|
|
|
|
|
Steel Services & Supplies, Inc. • Reinforcing
the Future
P.O. Box 2528 • Toa Baja, Puerto Rico 00951-2663
Tel. (787) 794-2250 • Fax. (787) 794-2390 |
|
| . |
|
|
|
|
|
