| . |
|
|
|
|
|
|
| . |
|
|
|
«
Back |
|
| . |
|
|
|
»
Epoxy Bonding Agents |
|
|
|
|
| . |
|
|
|
Steel
Services & Supplies: Ameri HM Gel |
|
| . |
|
|
|
The
Steel Services & Supplies Ameri HM Gel is a 100% solids hi-mod epoxy gel adhesive used
for vertical and overhead bonding applications and repairs. Also used as a grout for
anchor bolts, dowels and rebar. An epoxy
binder for vertical/overhead mortar repairs. Trowelable coating to protect against mild
chemical attack, chlorides, abrasion, etc. Grouting and anchoring horizontal/overhead
bolts, dowels, rebar etc.
Excellent adhesive for bonding concrete, steel, masonry,
wood etc. Pick-proof sealant for correctional institutions.
|
|
| . |
|
|
|
» Container Sizes |
|
|
|
|
| . |
|
|
|
Unit
Sizes:
• 1 Quart (.95 L)
• 2 Gallon (7.6 L)
• 10 Gallon (38 L)
• 110 Gallon (418 L)
*22 Oz. Dual Cartridge* Please refer
to Steel Services & Supplies Ameri HM Gel cartridge literature for more specific
information.
|
|
| . |
|
|
|
» Specifications |
|
|
|
|
| . |
|
|
|
Epoxy
Bonding Agent:
- Material shall be a 100% solids, high-modulus, non-sag gel,
moisture insensitive epoxy-resin compliant with ASTM C-881, Type I and IV, Grade 3, Class
C. Approved Product: Steel Services & Supplies Ameri HM Gel or approved equivalent.
|
|
| . |
|
|
|
» Applicable
Standards |
|
|
|
|
| . |
|
|
|
Certified
ASTM C-881, Type I and IV, Grade 3, Class C |
|
| . |
|
|
|
» Test Data |
|
|
|
|
| . |
|
|
|
| . |
|
|
|
|
|
A P P L I CA T I O N P R O P E R T I E S |
|
| . |
|
|
|
|
|
|
|
ASTM C-881, Type I and IV, Class C
(where applicable) |
|
|
|
|
|
|
|
Mix Ratio |
1:1 by volume |
|
|
|
|
|
|
|
|
Gel Time (ASTM C-881) |
55 minutes |
30 minutes min. |
|
|
|
|
|
|
|
Color |
Gray |
|
|
|
Consistency |
No sag |
.25"(.-64cm) max.
Initial Cure |
|
|
|
24 hours |
|
|
|
|
(80% ultimate
Strength) |
|
|
Final Cure |
7 days |
|
|
|
|
|
|
|
| . |
|
|
|
|
|
Cured Properties |
|
|
|
|
|
|
|
|
|
Compressive Strength |
|
|
|
|
|
|
|
|
|
(ASTM
D-695) |
10160 psi min.
(70 MPa) |
8000 psi min.
(55.1 MPa) |
|
|
|
|
|
|
| . |
|
|
|
|
|
Bond Strength (ASMT C-882) |
2290 psi (15.8 MPa) |
2000 psi min. (13.8 MPa) |
|
|
|
|
|
|
| . |
|
|
|
|
|
Pull Out Test |
|
|
|
|
|
|
|
|
|
Pull out
strength of epoxy coated steel dowel (diameter: 1" (2.54 cm), hole diameter:
1.125" (2.86 cm), 12" (30.5 cm) deep) deep) |
|
|
|
|
|
|
|
|
|
24 hours |
14000 lbs. (6350 kg) tensile load |
|
|
|
|
|
| . |
|
|
|
|
|
*Independently tested. |
|
|
|
|
|
|
|
|
| . |
|
|
|
|
|
|
|
.
. |
|
|
|
» Important
Information |
|
|
|
|
| . |
|
|
|
The
Steel Services & Supplies Ameri HM Gel should be stored in a dry environment
between 40-95°F (5-35°C). Under these conditions, the shelf life is twelve (12) months
in unopened, damage-free containers. Complete
technical and specification services are available from our authorized service
representatives.
|
|
| . |
|
|
| . |
|
|
|
« Back |
|
|
|
|
|
Steel
Services & Supplies, Inc. • Reinforcing the Future
P.O. Box 2528 • Toa Baja, Puerto Rico 00951-2663
Tel. (787) 794-2250 • Fax. (787) 794-2390 |
|
| . |
|
|
|
|
|
