| Brush
or spray apply ready to use Steel Services & Supplies Ameri Concreto Blaster at
approximately 75 sq. ft./gal. (1.8 m²/L), to the hardened concrete surface or mortar to
be removed. (If possible, immersion is the best application method). A light foaming
action will occur when applied. Allow to soak and agitate. After the cement paste has softened removed with a scraper or power washer.
The reaction between Steel Services & Supplies Ameri
Concreto Blaster and concrete (cement paste) will cause a fizzing. When the fizzing stops,
Steel Services & Supplies Ameri Concreto Blaster is neutralized or inert, dispose per
local city, county or state ordinances.
Heavy build-up on tools may require repeated applications
to remove the concrete down to clean metal.
When working on vertical surfaces, several applications may
be required to loosen hardened material due to run down.
Once the metal surface has been cleaned, apply Steel
Services & Supplies Ameri Release VOC to help prevent further build-up.
|
