|
DO
NOT place at temperatures below 50°F (10°C) or if the temperature is expected to fall
below 50°F (10°C) in the next twenty-four hour period. Severe variation of 1" (2.54
cm) or more over 1' (.30 m) or less should be referred to manufacturer for proper
procedure. Wind over 5 m.p.h. can dehydrate the Floor SL and cause cracking. Unless area
of application can be protected from wind, application should be postponed until there are
favorable conditions. Temperatures in excess of 80°F(26.7°C), ambient or surface, can
cause flash set and dehydration, resulting in cracking and debonding. Steel Services & Supplies Ameri Floor SL utilizes a rewettable primer.
Do not place in submerged or continuously wet environments. Use Steel Services &
Supplies Ameri LPL with Strong Bond for this type of application.
Caution. Contains Portland Cement and sand. Cement will
cause irritation. Avoid contact. Use of a dust respirator, safety goggles and rubber
gloves are recommended. Avoid prolonged contact with clothing. In case of contact with
eyes, immediately flush with water for at least 15 minutes. Get prompt medical attention.
DO NOT wear contact lenses when working with this product. DO NOT take internally. Keep
out of reach of children.
Avoid hazards by following all precautions found in the
Material Safety Data Sheet (MSDS), product labels and technical literature. Please read
this information prior to using the product.
|
|
